S.A Electronic Private Limited

7MF0340-1GM01-5AM2-Z E01+H01 SITRANS P320 Pressure transmitter 4 Differential pressure and flow PN160 0 HART (4...20 mA) 1 Measuring cell filling: Silicone oil G Maximum measuring span: 250 mbar (100.5 inH²O) M Oval flange, fastening thread: M10 (PN160), M12 (PN420) 0 Diaphragm: Stainless steel 316L/1.4404, measuring cell: Stainless steel 316L/1.4404; Sensor Differential pressure: process flange: Stainless steel 316/1.4408 1 Die-cast aluminum housing 5 Dual chamber device A no Ex M 2 x 1/2-14 NPT 2 With display (lid with glass window) E01 General approval without Ex approval: World (CE, UKCA, RCM, CSA, EAC, FM, KCC) H01 Mounting bracket, electrogalvanised steel Netweight: 1.800 KG Delivery time (working days): 40 plus transportation time Price group: 8P1 Fab Group: 4770 LKZ: FR AL: N ECCN: 3A991X Commodity code: 90262020

The 7MF0340… must be mounted below the minimum water level of the system. It is recommended that the reference leg of the system is piped into the (-) port on the 7MF0340… transmitter. During initial setup it is important to ensure that the reference leg has been filled manually. The reference leg must remain full during operation. When used in a steam vessel this is achieved with a condensate pot which remains completely full due to the condensing steam. It is necessary to have an accessible location at the top of the reference leg and condensation pot system to manually fill the reference leg if necessary. The 7MF0340… should be mounted in the vertical position. For easy installation and setup, it is highly recommended to use a three-valve manifold. During the startup process the 7MF0340… should be bled of air. This can be done by loosening the plugs opposite of the process connections when the vessel is not under pressure. Once a steady stream of liquid is visible the plugs can be retightened. Since some water may have been drained it is important to refill the reference leg to replace any lost liquid.

A pressure sensor (or pressure transmitter) converts the physical quantity 'pressure' into an industry-standard signal. In addition to a wide range of pressure sensors for general industrial applications, we offer special versions for refrigeration/air conditioning technology, the food industry, mobile working machines, medical gases and also the semiconductor industry. Our pressure sensor portfolio covers accuracies from 0.05 %, measuring ranges from 0.05 bar up to 15,000 bar, digital interfaces such as CANopen and IO-Link and also various international approvals, including for hazardous areas.