S.A Electronic Private Limited

APPLICATIONS

• PULSE TOTALIZING – UTILITY ACCOUNTING
• COST EFFECTIVE FIELD INTERFACE TO PLC/DCS
• I/OS WITH DUALRS485 FOR LOCAL HMI/REMOTE PLC MONITORING AND CONTROL
• REMOTE IOS FOR IIOT GATEWAYS
• SECURITY SYSTEMS
• SOLAR STRING MONITORING
• BUILDING AUTOMATION
• GAS DETECTION SYSTEMS
• PIPELINE MONITORING
• ENVIRONMENTAL MONITORING
• INFRASTRUCTURE MONITORING
• ASSET MANAGEMENT
• FIRE FIGHTING INDUSTRY
• MULTI-POINT SMART TRANSMITTER
• MACHINE HEALTH MONITORING
• BOREWELL PUMP AUTOMATION REMOTELY IN WATER DISTRIBUTION

I/O MODULE FOR IOT APPLICATION

Inputs:
  6 digital
  2 analog

- Outputs:
  2 digital

- Analog signals:
  0-5 V, 0-10 V, 0-20 mA and 4-20 mA

- Digital signals:
  NPN, PNP and dry contact

- Analog input impedance:
  mA: 15 Ω + 1.5 V
  V: 1 MΩ

- Digital input features:
  Logical level "0": <0.5 V
  Logical level "1": > 3 V
  Maximum voltage: 30 V
  Input impedance: 270 kΩ
  Input current:  30 Vdc (typical) 0.15 mA
  Maximum frequency (square wave):
  Dry contact: 10 Hz
  PNP: 3 kHz
  NPN: 3 kHz
  Minimum pulse duration:
  Dry contact: 50 ms
  PNP: 150 us
  NPN: 150 us

- Digital output characteristics:
  2 NPN digital outputs 
  Maximum current that can switch the output: 700 mA

- Analog channel resolution:
  Analog inputs: 15 bits (32000 levels)

- Communication interface:
  USB
  Ethernet: 10/100 Mb / s, IEEE standard 802.3u
  Wi-Fi 802.11 b / g / n 2.4 GHz
  RS485

- Software:
  NXperience

- Power supply:
  Voltage: 10 Vdc to 36 Vdc
  Wi-Fi model:
  Typical consumption: 70 mA 24V
  Maximum consumption: 160 mA 12V
  Ethernet model:
  Typical consumption: 50 mA 24V
  Maximum consumption: 120 mA 12V

- Operation conditions:
  Temperature:
 -20 to 60 ° C (-4 to 140 ° F)
  Humidity:
  5 to 95% RH, non-condensing

- Battery:
  CR2032 for internal clock retention

- Assembly:
  DIN rail or screw mounting.

- Degree of Protection
  IP20

- Enclosure:
  ABS + PC

DIGIRAIL OEE IS AN I/O MODULE FOR IOT APPLICATION DESIGNED FOR OEE (OVERALL EQUIPMENT EFFECTIVENESS) AND MES (MANUFACTURING EXECUTION SYSTEM) INDUSTRIAL SYSTEMS.

IT HAS THE MAIN INDUSTRIAL APPROVALS, IN ORDER TO ENSURE MONITORING RELIABILITY IN HARSH ENVIRONMENTS. ITS INTERNAL MEMORY BUFFER CAPABILITY GRANTS DATA RETENTION AND INTEGRITY IN AN EVENTUAL DOWNLINK, KEEPING THE DATA LOGGING SEAMLESSLY. PROVIDED WITH SECURE MQTT PROTOCOL, DIGIRAIL OEE TRANSMITS DATA NATIVELY TO GOOGLE CLOUD, MICROSOFT AZURE, AMAZON AWS, NOVUS CLOUD, OR ANY OTHER COMPATIBLE IOT CLOUD PLATFORM.

THE CONFIGURATION SOFTWARE NXPERIENCE PROVIDES A USER-FRIENDLY CONFIGURATION INTERFACE, ALLOWING INPUT SIMULATION AND OUTPUT FORCING, LOCALLY THROUGH USB PORT AND REMOTELY THROUGH MODBUS TCP. SYSTEM DIAGNOSIS AND MAINTENANCE BECOME VERY EASY THANKS TO THE REMOTE CONFIGURATION AND FUNCTIONS VIEWING. DIGIRAIL OEE ALLOWS TO SEND MQTT AND MODBUS TCP COMMANDS TO READ STATUS AND TO SET DEVICE PARAMETERS.

PROFIBUS:

- PROTOCOL: PROFIBUS DP

- OPERATES AT THE ENTIRE RANGE OF COMMUNICATION RATES, FROM 9600 BPS TO 12 MBPS

- ADDRESSING RANGE: 0 TO 125

- AUTOMATIC DETECTION OF SUPPORTED BAUD RATE “GSD” FILE INCLUDED

- TERMINATION AND POLARIZATION RESISTORS INCLUDED (ACTIVATED BY JUMPER)

- PROFIBUS CONNECTION: DB9 CONNECTOR
MODBUS:

- OPERATES FROM 1200 BPS TO 115200 BPS

- TERMINATION AND POLARIZATION RESISTORS INCLUDED (ACTIVATED BY JUMPER)

- COMMANDS AVAILABLE FOR DATA READING: “01 READ COIL STATUS”, “02 READ INPUT - STATUS”, “03 READ - HOLDING REGISTER” AND “04 READ INPUT REGISTER”

- COMMANDS AVAILABLE FOR DATA WRITING: “05 FORCE SINGLE COIL”, “06 PRESET SINGLE REGISTER”, “15 FORCE - MULTIPLE COILS” AND “16 PRESET MULTIPLE REGISTERS”

- PROTECTION AT THE BUS: ±60 VDC, 15 KV ESD

GENERAL:

- OPERATING ENVIRONMENT: 0 TO 50 °C, 30 TO 80% OF RELATIVE HUMIDITY, WITHOUT CONDENSATION

- MOUNTING: DIN 35 MM RAIL

- ELECTRICAL INSULATION BETWEEN THE PROFIBUS INTERFACE AND THE REST OF THE DEVICE: 1000 VAC

- POWER SUPPLY: 10 A 35 VDC. INTERNAL PROTECTION AGAINST INVERSE POLARITY

- FRONTAL LIT INDICATORS FOR COMMUNICATION AND STATUS