S.A Electronic Private Limited

APPLICATIONS

• FIELD INTERFACE DEVICE
• ISOLATION OF FIELD SIGNALS
• DISTRIBUTION OF SIGNALS
• TRANSLATION OF SIGNALS
• FACTORY AUTOMATION
• SCADA
• DCS
• IMPEDANCE MATCHING OF TRANSMITTERS AND RECEIVER INSTRUMENTS
• POWERING OF FIELD TRANSMITTERS
• MONITORING APPLICATION I.E. BATTERY VOLTAGE MONITOR

Masibus 9000L and 9000LE Signal Isolators are compact yet rugged Isolators used for reliable isolation and transformation of industry standard field signals. 9000L model is available in one input with one or two output. 9000LE is available in one and two channel input/output with isolation.

9000L series Isolators are highly accurate, have low drift, low temperature coefficient, fast response, high noise rejection and housed in a compact DIN-Rail mount enclosure.
Model 9000L has Aux supply range of 20 to 265V AC/DC as a unique feature whereas model 9000LE has option of 2W Transmitter Input with HART pass through. With dual output option, these models also acts as signal distributor.

A typical application could be where the signal has to be distributed for indication on local panel, field control room, main control room or DCS system. The isolator provides a good protection for sensitive system parts against voltage spikes etc.

he model ELMS1 safety electronics is a multi-functional and configurable safety switching device. The electronics consist of a control module and individual function modules that can be mounted next to each other. The modules are connected to each other via a redundant, standard DIN-rail bus.

The safety electronics feature a wide range of safety digital and analogue inputs, safety solid-state and safe contact outputs. Several analogue outputs and also fieldbus modules are available for those non-safety-relevant parts of the application during normal operation. The status of the inputs and outputs, operating voltage and other diagnostic messages are displayed on a LED matrix.

The control module of the safety electronics is certified in accordance with DIN EN 13849-1 Category 4 PLe through DGUV. Based on Table 3 of DIN EN 13849-1, this corresponds to SIL 3.